Stabilus STAB-O-SHOC hydraulic dampers

The Stab-O-Shoc damper is a hydraulic damping element that consists of a pressure tube with a connection fitting, a piston rod with piston system and a piston rod connection fitting.

The piston rod of the Stab-O-Shoc damper is mounted in a special seal-guide system in the pressure tube.

The piston rod in the pressure tube of the Stab-O-Shoc damper features damping pistons and the related valve system.

The movement of the piston displaces the filling medium (oil), which is pressed through the valve system and thus produces a damping force of the Stab-O-Shoc damper .

Dampers are needed to influence the nature of movements and vibrations. Dampers are designed to optimally match the particular application.

Stab-o-Shoc hydraulic dampers

Buy StabOShoc hydraulic dampers for hydraulic dampening of vibrations

Standard Range for the Stab-O-Shoc hydraulic damper

D1 [mm]	D2 [mm]	Max Damping force [N]	Max. Stroke [mm]
6	15,6	1000	80
8	24	5000	180
10	24	5000	180
10	29	7000	200
8	38	1600	250
11	50	2500	300
14	64	3000	450

Product Range for the Stab-O-Shoc hydraulic damper

STABILUS: STAB-O-SHOC dampers This damper is available as follows:

STAB-O-SHOC as a position-dependent damper without extension force with damping forces in one direction or in the extension and compression direction.
STAB-O-SHOC as a position-dependent damper with extension force, with damping forces in one direction or in the extension and compression direction.
STAB-O-SHOC as a position-independent damper without extension force with damping forces in one direction or in the extension and compression.
Fitted as standard with eyelets at both ends.

Special types of dampers with higher damping forces as well as further connection variants are available on request.

Variants for the Stab-O-Shoc hydraulic damper

The damping force characteristic may be designed to be linear, progressive or degressive,. The damper may be used up to a temperatures in excess of 100 C. Special designs for temperatures in excel of 100 C are possible.

Gas Springs Design Assistance

We provide design assistance for motion control applications utilizing gas springs, locking springs, and hydraulic dampers. Our patented "einbau" software allows us to provide detailed information on mounting points, handle loads, temperature compensation and life expectancy in our simulation. Fill out our online application form for Gas Spring Design Assistance and we will provide a detailed simulation quickly thereby lowering your engineering cycle time.

STABILUS: STAB-O-SHOC dampers