Numatics, MPG "S"
Series Valves
 "S"
Series Miniature Stainless Steel Valve
- Tested in excess of 500 Million cycles
- Maximum leakage rate: 0.016 SCCM (Bubble Tight)
- Temperature range: -10° F to 150° F
(-23° C to 66° C)
- Class "A" Insulated coils
- All valves 100% factory tested
- #20 AWG & #24 AWG Teflon insulated lead wires
- Tin plated brass .110 x .020 Fast-on terminals
- 10 m (Micron) filtration recommended
- Response time < .010 Seconds
- All valves rated to 28" Hg. Vac
- Oxygen Clean available
- Recommended for use with dry air, lubricated air, vacuum,
non-corrosive, non-toxic, non-flammable dry gases
- Contact us for other service applications
Technical Data
*FLOW : (SLPM) Standard liters
per minute Port 1->2 (normally closed)
NOTE: Flow test are based on average readings and nominal
components.
All outlets are vented to atmosphere. Results may vary.
|
Valve |
|
|
|
Maximum Pressure |
| Series |
Wattage |
Orifice |
CV |
N.C. |
N.O. |
| LS |
0.65 Watt |
.030 (.75) |
.025 |
100 psi (6.8) |
50 psi (3.4) |
| HS |
1.5 Watt |
.030 (.75) |
.025 |
100 psi (6.8) |
100 psi (6.8) |
| 1.5 Watt |
.040 (1.0) |
.035 |
100 psi (6.8) |
50 psi (3.4) |
| 1.5 Watt |
.050 (1.25) |
.055 |
100 psi (6.8) |
50 psi (3.4) |
| 1.5 Watt |
.060 (1.5) |
.065 |
50 psi (3.4) |
50 psi (3.4) |
| 1.5 Watt |
.070 (1.8) |
.075 |
50 psi (3.4) |
50 psi (3.4) |
| 1.5 Watt |
.080 (2.0) |
.100 |
50 psi (3.4) |
50 psi (3.4) |
For other pressure ranges and
orifice sizes please contact us.
Numbers in parentheses ( ) equivalent to Millimeters or BAR
where applicable.
How to order "S" Series Valves
|
